The VK-P Series TSI transducer is a high-grade eddy-current type non-contacting
transducer for shaft position and differential expansion measurement of rotating
machinery required for TSI. It offers the necessary low temperature drift and stability for
shaft position measurement.
In addition, it can be used in an explosive gas atmosphere due to its intrinsically safe
construction.
Main Functions
1. System composition
Consists of sensor, extension cable and driver.
Available in system lengths of 5m and 9m to cover the total distance
between sensor and driver.
2. Various types of measured range
The VK-P Series Transducer is offered in four measured ranges of 3mm,
6mm, 13.5mm and 26mm.
Suitable for long-range measurement as required for TSI.
3. Intrinsic safety explosion-proof construction
RIIS equivalent to IEC standard
Ex ia IIC T5 (VK-302P)
FM, BASEEFA
4. Environment
Extensive operating temperature range (?40 to +125°C)
Not affected by lubricating oil mist or dust. (Exclude connector)
Also available for use in low-density corrosive gas atmosphere
(For ditails, contact us). (Not available for rain water at out door use)