VK-202P Transducer
New measurement range for VK-P Series transducer is lined up.
VK-152R Transducer
The VK-R Series transducer is an eddy-current transducer designed to satisfy the American Petroleum Institute
API St'd 670. It measures the shaft vibration of rotating machinery without contact.
As this transducer has a feature of long cable extension, it is most suitable for rotating machinery such as gas
turbines for power generation, etc. whose size has recently become large and also which requires vibration
transducers with long cable length.
In addition, it can be used in an explosive gas atmosphere due to its intrinsic safety construction.
PK-452P Rider ring Transducer
The PK-452P transducer measures the gap between the piston set as the target and located in any reciprocating
compressor and the sensing surface of this transducer, there by allowing the amount of rider ring abrasion to be
measured.
The output of the PK-452P is input to the VM-52 Bottom Hold Monitor to finally measure the amount of rider
ring abrasion.
Thus, the replacement period of the rider ring can easily be predicted.
V