The direct-acting proportional valve Type 2833can be used as a control valve for process control and is suitable for technical vacuum. Low hysteresis, high repeatability and high sensitivityensure superior regulation behaviour. Thanksto an elastomeric sealing, the valve closestightly and securely.Valve control takes place through the controlelectronics of Type 8605, which converts ananalogue input signal into a PWM signal2).Further, functional features of the Type 8605 electronic control unit:
• Temperature compensation for coil heatingby internal current regulation
• Simple zero and span settings
• Ramp function to dampen fast statuschanges
Body material Brass, Stainless steel
Seal material FKM, EPDM on request
Media Neutral gases, liquids
Medium temperature -10 ... +90 °C
Ambient temperature max. +55 °C
Viscosity max. 21 mm2/s
Operating voltage 24 V DC
Power consumption 9 W
Duty cycle 100 % continuously rated
Port connection Sub-base, G 1/8, G 1/4, NPT 1/8, NPT 1/4,others on request
Electric connection Cable plug Type 2508 acc. toDIN EN 175301-803 Form A
Installation As required, preferably with actuator in upright position
本月特价
分享仪器
隐藏对比框