Features
Digital
Digital Circuitry: Eliminates the need to null the meter for soil resistivity. Soil pH is obtained from same probe and processed digitally; digital circuitry allows for repeatable readings with improved accuracy.
Internal Calibration: Soil Probe Meter contains an internal calibration circuit, which allows the meter to self-calibrate in the field.
LCD Display: Two lines and easy to read in most light conditions.
Ease of Use: One probe, one meter, digital display, two soil test results…pH and resistivity.
Rugged Construction: The Soil Probe Meter is housed in a water-resistant (NEMA 4 / IP64) case for protection from the elements in outdoor applications. Probes are constructed of steel with baked on coating for longer life.
Protective Case: Each Soil Probe Meter comes standard with a blow-molded HDPE case.
Probes: Each Soil Probe Meter is furnished with two complete probes and is ready to use. it includes one Bell Hole Probe Kit and one Subsurface Long Probe.
Soil Probe Meter: Meter case is ergonomically designed for single-hand operation and is shock resistant.
|
( A ) LCD Display (2 lines) |
Specifications
Meter | |
Dimensions |
7.5 x 4.75 x 2.25 inches |
Weight |
|
Environmental Protection |
ABS high-impact plastic, corrosion proof, sealed to NEMA4 / IP64 |
|
0 to 1.5 Mohm-cm |
Resistivity Accuracy |
± 0.5% of reading |
pH Range |
3 to 10 standard units |
pH Accuracy |
± 0.5 standard units |
Display |
LCD, 2 lines x 16 characters |
Switches |
NEMA4 / IP64 sealed toggle switches |
Power Supply |
4 AA alkaline batteries for approximately 100 hours of continuous operation |
Temperature & Humidity |
-15 to 60ºC operating, 0-100% RH, non-condensing |
Probes | |
|
T-handle, 12 inches by 5/8-inch diameter shaft of carbon steel construction with ¾-inch diameter measurement sensor for pH and resistivity; probe wire with coiled cable for direct connection to soil probe meter. |
Subsurface Probe |
T-handle, 40 inches by 5/8-inch diameter shaft of carbon steel construction with ¾-inch diameter measurement sensor for pH and resistivity; probe with cradle for direct connection to soil meter. |
Protective Case | |
Case |
Watertight, crush proof, and dust proof with easy-open, double-throw latches, open-cell core with solid-wall design, o-ring seal, fold down handles, stainless steel hardware and padlock protectors. |
Outside Dimensions |
53 x 16 x 6-¼ inches |
Lid & Back |
Double-walled construction for added crush resistance and strength. |
Weight |
20 pounds without soil probe meter, bell hole probe, subsurface probe or accessories. |
Inside Case |
Fitted with 2.2-pound density polyethylene foam. Foam insert is molded to fit the soil probe meter, bell hole probe, subsurface probe, maintenance kit and soil probe meter manual. |