紫外线火焰探测器
The Model FL3101H is an Ultraviolet-only flame detector designed to detect fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It detects in the ultraviolet (UV) spectral range for optimized speed of response. Configurations with dual Modbus and HART are available. Modbus and HART data can be used for predictive maintenance.
FL3100 Series flame detectors electronics are integral within their explosion-proof housings, allowing detector information to be processed at the point of detection. The detectors also provide a 4-20mA stepped output signal indicating detector status. The COPM (Continuous Optical Path Monitoring) self-test feature checks the optical path integrity (window cleanliness) and the detectors electronic circuitry once every minute. CSA, FM, IECEx, ATEX approved, SIL 3 suitable. FM certified to IEC 61508.
Wide field of view |
Greater fire detection coverage |
4-20 mA stepped output |
Industry standard for remote alarm and fault indication |
HART and dual Modbus communication available |
Provides complete status and control capability in the control room |
Wide operating temperature range |
Permits operation at higher ambient temperature |
Continuous optical path monitoring (COPM) |
Checks optical path integrity and detectors electronic circuitry once every minute |
Three SPDT high current programmable relay outputs |
Immediate and time delayed relay outputs for alarm, programmable relay outputs |
Wireless capability |
Compatible with ELPRO Technologies wireless devices |