Combination Ferrous & Non-Ferrous Instrument TM-4 provides fast, non-destructive, accurate coating measurements in range from 0 to 15 000um.
ТМ-4 has memory on 5000 results of measurements, RS232 interface for PC connection, a mode of selective averaging of results and possibility of programming to 15 approximate scales, both from the device keyboard, and from the personal computer.
|
Possibility of calibration to 15 approximate scales
Adjustable backlight of the screen
The mode of selective averaging
Memory: 5000 results measurement |
The mode of the automatic alarm system of defect
Mains power: internal LiIon battery
The mode of autoswitching-off
Possibility to order transducers of various configurations |
Basic Delivery Set
ТМ-4 main unit
Transducer M120 (0-2mm, ferrous materials)
RS232 cable
Software CD Rom
Operating manual
Transport bag
Universal Delivery Set
Basic Delivery Set
Transducer H120 (0-2мм, non-ferrous)
Transducers
М120 (range 0-2mm, ferrous)
М150 (range 0,05-5mm, ferrous)
М215 (range 2-15mm, ferrous)
H120 (range 0-2mm, non-ferrous)
H150 (range 0,05-5mm, non-ferrous)
H215 (range 2-15mm, non-ferrous)
Related Products
Commercial Grade Shim Set КМТ-1 (5 plastic shims)
Commercial Grade Shim Set КМТ-2 (7 plastic shims + ferrous or non-ferrous zero plate)
Technical Specification
Coating thickness measurement range
up to 15 000 um with different transducers
Indication accuracy
1, 0.1, 0.01 or 0.001 - is set at programming scales
Scales
15 programmable direct from keypad
or by PC scales, up to 10 points for
linear approximation
Software support
Dlogger
Scale
Mains power
internal Li-Ion battery
Operating time
not less 30 hours
Autoswitching-off
after 90 sec
Operating temperature
-10 C to +50 C
Base Unit Dimensions (H x W x D)
150 mm x 80 mm x 40 mm
Weight
230 g
本月特价
分享仪器
隐藏对比框