The Type 8175 is a non-contact filling level transmitter, designed for liquid level or volume measurement in open or closed vessels. The unit is also suitable for limited use with solids (depending on angle). The unit with the 2 relay option makes it possible to provide alarm messages and to automatically carry out filling and draining procedures.
The device is available in different models: • Compact transmitter with integrated ultrasonic sensor.
• Remote transmitter, for panel- or wall mounting, for connection to the Bürkert 8170 sensor
General data
Display 15 x 60 mm, 8-digit LCD, alphanumeric,
15 segments, 9 mm high
Protection Lockable switch for the “ENTER” key
Process connection Mounting thread G 2” or NPT 2”
Electrical connections Cable plug according to EN175301-803or glands1)
Connection cable Shielded cable; 1.5mm2 max. cross-section
Standards and approvals
According to generic norm EN 50081-1
According to generic norm EN 50082-2
According to safety regulations formeasuring instruments for regulation andaboratory NF EN 61010-1
Complete device data (compact or remote with 8170 probe versions)
Measuring type Level, distance (cm, m, inch or foot) or volume
measurement (l, m3, US-Gal or Imp-Gal)
Measuring range2) 0.3 to 10 m (Compact version)
0.3 to 7 m (Panel- and Wall- mounted version)
Fluid temperature -40 up to 80°C (-40 to 176°F)
Pressure range max. 2 bar (29.02 PSI) at 25°C (77°F)
Temperature adjustment Programmable depending on gas medium
Resolution ± 3 mm
Emission frequency 50 kHz
Fill beam width 16 degrees conical
Pulse rate 8 pulses per second
Blocking distance 30 cm from transducer base
本月特价
分享仪器
隐藏对比框