本月特价 热卖产品 货到付款 现场演示 延长保修 终身维修
|
|
|
Measuring Range |
From 1” to 48” (25.4mm to 122cm) bolts |
|
Time |
Nanoseconds |
|
Elongation |
Change in length (inches/millimeters) |
|
Load |
Force load applied (pounds kIP or kN Killonewtons) |
|
Stress |
Force for unit area stress applied (pounds kPSI or megapascals MPa) |
|
Strain % |
percentage strain applied (inches per inch or millimeters per millimeter) |
|
Resolution |
+/- .00001 inches (0.0001 mm) |
|
Velocity Range |
.0492 to .3936 in/ms 1250 to 9999 meters/sec |
|
Calibration |
Fixed, Single, and Two point zero calibration options.
Select bolt material types from a preset or custom list. |
|
Units |
English & Metric / Fahrenheit & Centigrade |
|
Measuring Modes |
Pulse-Echo (standard) Pulse-Echo w/Gate (fine adjust) |
|
Pulser |
Square wave pulser with adjustable pulse width (spike, thin, wide) |
|
Receiver |
Manual or Auto Set gain control with 40dB range |
|
Timing |
10 bit 250 MHz digitizer |
|
Display Modes |
A-Scan - Rectified +/- (half wave view), or RF (full waveform view) |
|
Alarm Limits |
Set hi and lo tolerances with audible beeper, viewable scan bar, and visual LEDs |
|
Data Logger (Internal) |
Total of 8,000 readings, multiple bolt groups. Stores both waveform views, nanoseconds, elongation, load, stress, and strain for each reading |
|
Memory |
16 megabit non-volatile ram |
|
Transducer |
Single Element (1 to 10 MHz & 1/8” to 1” diameters) |
|
Transducer Cable Lenght |
10 foot (custom lengths available, inquire) |
|
Temperature Probe |
for automatic temperature compensation |
|
Setup Memory |
64 custom user defined setups. Factory setups can also be edited by the user |
|
Gate |
Gate used to fine adjust where the detection point occurs |
|
Auto Set |
Locates the detection signal, optimizes the gain setting, and adjusts the overall display to show the waveform and detection point automatically |
|
Field Calibration |
Vector & linear regression. Includes Factory calibration traceable to national standards |
|
Power |
Three 1.5V alkaline or 1.2V NiCad AA cells.
Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included.) |
|
Dimensions |
Width (2.5in/63.5 mm) Height (6.5 in/165 mm) Depth (1.24 in/31.5 mm) |
|
Weight |
13.5 ounces (with batteries) |
|
Operating Temperature |
14 to 140F (-10C to 60C) |
分享仪器
隐藏对比框