Description
Syntho-Quickset™ is a fast-setting, Kevlar reinforced, adhesive and repair epoxy system.
Typical Applications
Bonding applications
Pipe repairs
Concrete repairs
Chemically resistant coatings
Benefits
Sets rapidly in thin films, even under adverse, humid conditions.
Fast setting time
Good chemical resistance
DOT Non-corrosive
Availability
1 lb and 4 lb containers
Special packaging available upon request
Physical Properties
Preparation & Application
|
Color, Resin
Color, Catalyst
Viscosity, 25°C, Resin
Viscosity, 25°C, Catalyst
Specific gravity, 25°, Resin
Specific gravity, 25°C, Catalyst
Mix ratio by weight (resin:catalyst)
Thin film set time, 25°C
Gel time,100 grams, 25°C
Flexural strength
Flexural modulus
Tensile strength
Tensile modulus
Elongation |
Gray
White
Paste
000 cps
1.56
1.1
100:13
1.5 hrs
15 minutes
16,700 psi
377 psi
9,400 psi
493 psi
2.5% |
|
Chemical resistance
Gasohol
Sydrol
Distilled water
Inorganic acids
Alkalies
Dilute Acetic Acid |
Excellent
Excellent
Excellent
Excellent
Excellent
Excellent
|
1. , Clean and roughen: Surfaces must be clean and grease free. Use an oil-free solvent such as acetone to wipe surfaces. Adhesion can be substantially increased by abrading the surfaces to be bonded with emery cloth, sand paper, carbide grinding tools, sand blasting, carbide grinding tools, sand blasting, etc. A roughened, porous surface will produce the best results. Any oxidized metal films should be removed just prior to application of the epoxy adhesive mixture.
2., Mix: Thoroughly mix by weight 100 parts Epoxy to 13 parts Catalyst.
3., Application: Apply mixed product within five to ten minutes.
4., Storage & Handling: Store in a cool, dry place in original containers. Expected shelf life is one year in original unopened containers. Please read the Material Safety Data Sheet (MSDS) before using this or any other chemicals.
本月特价
分享仪器
隐藏对比框