本月特价 热卖产品 货到付款 现场演示 延长保修 终身维修
|
Description
Amprobe’s ACDC-100 AC/DC Digital Clamp-On Multimeter is where accuracy, quality, and newest technology meet. The ACDC-100 offers superior AC/DC measurement capabilities, highest product quality and enhanced ergonomics with Red, Rubber, Ribs™ design.
|
 |
|
Features
1000A DC current, 800A AC current
Large, easy-to-read LCD display
Auto and manual ranging
Relative zero mode
Auto power off
Data hold
MAX capture function for inrush current measurements (30 ms response)
Diode Test
Audible continuity
Accommodates conductors up to 2.00” (50 mm) in diameter
"Third hand" - test probe holder
Rubber over-molded case with built-in probes storage
Carrying case, test leads, batteries (installed) and user manual included
Wide choice of Amprobe multimeter accessories |
 |
|
DC Voltage Ranges |
400.0 mV, 4.000, 40.00, 400.0 V, 600 V |
|
DC Voltage Accuracy |
± 0.5% rdg ± 3 digits |
|
AC Voltage Ranges |
400.0 mV, 4.000, 40.00, 400.0 V, 600 V |
|
AC Voltage Accuracy |
± 1.5% rdg ± 4 digits |
|
Input Impedance |
10 MΩ |
|
Transient Protection |
6.5 kV (1.2 / 50 μs surge) |
|
DC Current (clamp-on) |
400.0, 1000 A |
|
DC Current Accuracy |
± 1.5% rdg ± 4 digits |
|
AC Current (clamp-on) |
400.0, 800 A (50-500 Hz) |
|
AC Current Accuracy |
± 1.5% rdg ± 5 digits |
|
Overload Protection |
1000 A dc or 800A rms continuous |
|
Resistance Ranges |
400.0 Ω, 4.000, 40.00, 400.0 kΩ, 4.000, 40.00 MΩ |
|
Capacitance Ranges |
50.0, 500.0 nF, 5.000 μF, 50.00 μF, 500.0 μF, 3000 μF |
|
Diode Test |
< 1.6 VDC @ 0.4 mA |
|
Audible Continuity Test |
Between 10 Ω and 120 Ω |
|
Display |
3-3/4 digit (4000 count) LCD display |
|
Update Rate |
3 per second |
|
Polarity |
Automatic |
|
Operating Temperature |
0°C to 40°C |
|
Relative Humidity |
< 80% RH up to 31°C decreasing to 50% RH at 40°C |
|
Altitude |
Operation below 2000 m. Indoor use. |
|
Storage Temperature |
-20°C to 60°C, < 80% RH (with battery removed) |
|
Low Battery |
Below approx. 2.4V |
|
Power Supply |
Two 1.5V AAA Size (NEDA 24G or IEC R03) batteries or two 1.5V AAA Size (NEDA 24A or IEC LR03) alkaline batteries. |
|
Power Consumption |
Typical 11 mA for ACA/DCA and 2.9 mA for other functions |
|
Auto Power Off |
After being idle for 30 minutes |
|
Max Conductor Diameter |
50 mm (2.00 in) |
|
Special Features |
30ms Max Hold; Data Hold; Relative Zero mode |
|
Dimensions |
227x 78 x 40 mm (8.9 x 3.1 x 1.6 in) |
|
Weight |
290 gm (10 oz) |
|
Safety |
Meets EN61010-1:2001; IEC61010-2-032(2002), EN61010-2-032(2002), UL61010B-2-032(2003), Category III 600 Volts AC & DC. |
|
Related Products |
Amprobe ACDC-100 TRMS AC/DC Clamp-On Multimeter |
分享仪器
隐藏对比框