The RKI S-Series gas sensor/transmitters are highly reliable and cost effective basic 4-20 mA transmitters for the detection of common gas hazards. The S-Series transmitters are available for LEL (catalytic), LEL (IR) CH4, LEL (IR) HC, O2, H2S, CO, or CO2 (IR). The electronics are encased inside a potted package to avoid damage from mechanical abuse or corrosion, and this assembly is installed inside an explosion-proof enclosure. All sensors are explosion-proof with flame arrestors and approved for use in hazardous atmospheres. There is also an optional version for oxygen for use in non-hazardous atmospheres.
The only tools required to calibrate the S-Series are a voltmeter, screwdriver, and cal gas. The zero and calibration functions are performed by adjusting potentiometers on the amplifiers. The amplifier has test jacks for connecting to a voltmeter for calibration purposes, and the sensor response is viewed on the voltmeter as a 100 mV to 500 mV signal. Field calibration can be performed easily and quickly by one person.
The S-Series transmitters can be used either indoors or outdoors. The flame arrestors utilize a patented coating which make them water repellent, and splash guards are also available for use in very wet environments.
The transmitter operates from 24 VDC (11VDC to 30 VDC), and provides a 4-20mA signal which can be connected to a wide variety of controllers.
Features
Explosion proof housing
Patented water repellent sensor coating
Available for LEL, H2S, CO, O2 , and ppm HC
IR sensors available for LEL & CO2
Long life sensors (2 + years typical)
Competitively priced
UL or CSA classified (most versions)
Applications
Petrochemical Plants
Refineries
Gas Plants
Offshore Drilling Platforms
Water & wastewater treatment plants
Pulp & paper mills
Gas, telephone, & electric utilities
Parking garages
Manufacturing facilities
Steel
Automotive
Chemical storage buildings
本月特价
分享仪器
隐藏对比框