Five-Gas Detector: H2S, CO, O2, SO2, PH3, NH3, NO2, HCN, Cl2, ClO2, O3 and Combustibles
Continuous LCD shows simultaneous gas concentrations for five gases
Smaller and over 50% lighter than competitive instruments
Water-resistant design with an integral concussionproof enclosure
Integral motorized pump option for remote sampling
Two power options: AA alkaline or rechargeable hotswappable battery packs
Provides 95 dB alarm tone and two bright wideangled alarm bars
Equipped with internal vibrating alarm for high noise areas
Multi-language support in English, French, German, Spanish and Portuguese
Three backlight options: standard梐ctivates in low light (auto), in alarm (auto) and reactivates ondemand; alarm only梐ctivates in alarm conditions and reactivates on-demand; stealth mode?deactivated
Four alarm levels: instantaneous Low and High Alarm for all gases;
TWA (time-weighted average) and STEL (short-term exposure limit) for toxic gases
Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
Records TWA, STEL and maximum exposures to gas and displays readings on command
User selectable field options include: language selection, confidence beep, span level, set TWA/STEL calculation choice, set calibration due date, passcode protection, latching alarm,
"SAFE" display function, stealth mode and selectable ppm resolution for some gases (e.g. SO
2 0.1 ppm)
Full function self-test of: sensor, battery and circuit integrity; and audible/visual alarms
GasAlertMicro 5 portable gas detector simultaneously monitors and displays up to five potential atmospheric hazards including oxygen, combustible gases and a range of toxic gases. Compact and lightweight, GasAlertMicro 5 adds multigas detection to BW Technologies?water resistant line of detectors. Audible, visual and vibrator alarms activate in the event of a low, high, TWA or STEL alarm condition. An optional motorized pump is available.
Beyond features that come standard with BW portable instruments such as confidence beep, full function self-test, automatic calibration and passcode protection, GasAlertMicro 5 offers an extended selection of user-settable field options now including: stealth mode, backlight options, selectable ppm resolution, STEL / TWA measurement choice, combustible correction factor options, usersettable calibration gas concentrations and multi-language support.
| Gas |
Measuring Range |
Default Resolution |
High Resolution |
TWA |
STEL |
LOW |
HIGH |
| H2S |
0-500 ppm |
1.0 ppm |
0.1 ppm |
10 |
15 |
10 |
15 |
| CO |
0-999 ppm |
1.0 ppm |
N/A |
35 |
50 |
35 |
200 |
| TwinTox (H2S) |
0-500 ppm |
1.0 ppm |
0.1 ppm |
10 |
15 |
10 |
15 |
| TwinTox (CO) |
0-500 ppm |
1.0 ppm |
N/A |
35 |
50 |
35 |
200 |
| O2 |
0-30.0% |
0.50% |
N/A |
N/A |
N/A |
19.5 |
23.5 |
| SO2 |
0-150 ppm |
1.0 ppm |
0.1 ppm |
2 |
5 |
2 |
5 |
| PH3 |
0-5.0 ppm |
1.0 ppm |
0.1 ppm |
0.3 |
1.0 |
0.3 |
1.0 |
| NH3 |
0-100 ppm |
1.0 ppm |
0.1 ppm |
25 |
35 |
25 |
50 |
| NO2 |
0-99.9 ppm |
1.0 ppm |
1.0 ppm |
2.0 |
5.0 |
2.0 |
5.0 |
| HCN |
0-30.0 ppm |
1.0 ppm |
0.1 ppm |
4.7 |
10.0 |
4.7 |
10.0 |
| Cl2 |
0-50.0 ppm |
1.0 ppm |
0.1 ppm |
0.5 |
1.0 |
0.5 |
1.0 |
| ClO2 |
0-1.00 ppm |
0.1 ppm |
0.01 ppm |
0.1 |
0.3 |
0.1 |
0.3 |
| O3 |
0-1.00 ppm |
0.1 ppm |
0.01 ppm |
0.1 |
0.1 |
0.1 |
0.1 |
Combustible
Gases |
0-100% LEL
0-5.0% v/v |
1%
0.1% |
N/A |
N/A |
N/A |
10%
0.5% |
20%
1.0% |
Auto zero: Yes
Calibration: Automatic
Backlight: Standard Mode: low light (auto); alarm condition (auto); reactivation on demand Alarm Only Mode: alarm condition (auto); reactivation on demand Stealth Mode: backlight inactive; audible and visual alarms silenced
Sensor: Plug-in, electrochemical cell (toxic and oxygen); catalytic (LEL)
User field options: Confidence beep, set STEL period, force calibration on start-up, enable / disable sensor, passcode protection, latching alarms, span level, passed calibration user-lockout option, "SAFE" display function, stealth mode, fast pump, oxygen auto-cal on start-up, alarm only backlight mode, combustible gas measurement (% LEL or % by volume methane), LCD language option, STEL calculation choice, TWA calculation choice, combustible correction factor options, usersettable calibration gas level, high resolution, clock
ALARM INDICATORS: Clearly advises alarm conditions with audible, visual and vibrator alarms
Visual alarms: Two flashing alarm bars visible from all angles. LCD indicates gas present and alarm levels encountered
Audible alarm: Typically 95 dB at 1 ft. / 30 cm variable pulsed audible alarm
Vibrator alarm: Pulses warning in gas alarm conditions or for any status alarms
Status alarms: Low battery, over range, multiple gas / pump and failed or missing sensor
ALARM LEVELS: Instantaneous Low Alarm for all gases; Instantaneous High Alarm for all gases; TWA (time-weighted average) and STEL (short-term exposure limit) for toxics, OL (over alarm) for LEL
LCD: Continuous, alphanumeric gas readout and status display advises:
Gases monitored: H2S, CO, O2, SO2, PH3, NH3, NO2, HCN, Cl2, ClO2, O3, and/or combustibles (0-100% LEL or 0-5.0% methane)
Gas concentration: Simultaneously and continuously displays gas concentration(s) for all sensors (in ppm, % LEL or % v/v)
Peak (MAX)/STEL/TWA ppm: Records exposures and displays on demand
Alarm setpoints: Displayed on activation and on demand
Calibration due date: Days remaining on start-up
Clock: Real-time clock setting displayed on start-up
TESTS:
Full function self-test: Sensor integrity, circuitry, battery and audible/visual alarms on activation
Battery: Continuous
GENERAL SPECIFICATIONS: Rugged, composite material; two-shot molded polymer case with integral anti-shock boot
Operating temperature: -4 to 122OF / -20 to 50OC
Humidity: 0 - 95% RH (non-condensing)
EMI/RFI: Complies with EMC Directive 89/336/EEC
Protection: Highly water resistant and dust proof housing
Battery Options: 23 hours on three AA alkaline cells or 20 hours on rechargeable 揾ot-swappable?battery pack when equipped with oxygen, combustible, TwinTox (H2S/CO) and one additional toxic sensor
Size: 5.7 x 2.9 x 1.5 in. / 14.5 x 7.4 x 3.8 cm
Weight: 13.1 oz. / 370 g
WARRANTY: Full 2-year warranty including all sensors (1 year NH3 sensor)
DATALOGGER OPTIONS: User-downloadable datalogger
Data recorder: All events and occurrences (calibration zero adjustment, calibration span adjustment, gas readings, TWA, STEL, alarm condition, failures detected by the microprocessor).
Sampling rate: Factory set at 5-second intervals and user-settable from 1 to 127-second intervals
Storage: 4 months of continuous data at 5 second intervals via memory card; when full, the wrap-around feature replaces oldest data with most recent data
本月特价
分享仪器
隐藏对比框