CMCP-1210 Spring Loaded Tip Sensitive Bearing Temperature Sensors温度传感器.
The CMCP-1210 series bearing temperature sensor provides, fast and accurate readings from bearings, blocks, and other solids. The spring-loaded holder ensures solid contact in drilled holes with a built-in oil seal. The CMCP-1210 is shipped with a standard 8.4" sensing probe which features a copper alloy tip for quick response to temperature changes. Probes may be cut to length in the field using a tube cutter. Additional sizes are available on request.
Features
Tip Sensitive RTD or Thermocouple
For use to 260º C (500º F)
Adjustable Spring-Loaded Holder with Fluid Seal
Aluminum or Stainless Steel Connection Head
For Bearings, Blocks and Other Solids
Explosion Proof Version Available
All Parts FM Approved - Conduit Head, Spring Loaded Probe Holder, and Probe
Specifications:
Temperature range: |
-50º to 260º C (-58º to 500º F) |
Material: |
|
Probe: |
SS with Copper Alloy Tip |
Holder: |
Stainless Steel with Viton O-ring |
Head: |
Aluminum or Stainless Steel |
Pressure rating: |
50 psi (3.4 bar) |
Insulation resistance: |
10 megohms min. at 100 Vdc, leads to case.
Ungrounded junctions only on thermocouples. |
Connection: |
Terminal block for wires to 14 AWG |
Conduit thread: |
1/2” NPT |
Bearing entry: |
1/2” NPT (For 3/4” NPT, use optional CMCP-1211 Adapter. Add 1” to length for adapter.) |
Time constant: |
|
Typical value in moving water: |
2.0 seconds |