´úÀį́Íå¹ÌγINSTEKÊýλ´¢´æʾ²¨Æ÷GDS-2062¼Û¸ñ-Êý×Öʾ²¨Æ÷Ô­Àí/¹æ¸ñ/²ÎÊý

ʾ²¨Æ÷GDS-2062Ìصã 60MHz Ƶ¿í 2ÊäÈëͨµÀ 1GSa/s ¼´Ê±È¡ÑùÂÊÒÔ¼° 25GSa/s µÈЧȡÑùÂÊ 25000µãÖ®¼ÇÒäÌ峤¶È 5.6 …¼ TFT ²ÊÉ« LCD Ó«Ä» Ö§Ô®USB HOST/DEVICE£º¿ÉʹÓÃUSBËæÉíµú¼° USB Ó¡±í»ú Ö§Ô®AC/DCµçÔ´²Ù×÷ģʽ£¨Ñ¡¹º£©

ʾ²¨Æ÷GDS-2062¹æ¸ñ VERTICAL Channels 2 Bandwidth DC ~ 60MHz (-3dB) Rise Time 5.8ns Approx. Sensitivity 2mV/div ~ 5V/div (1-2-5 increments) Accuracy ¡Ó(3% x |Readout|+0.05 div x Volts/div+0.8mV) Input Coupling AC, DC & Ground Input Impedance 1M¡Ó2%, ~16pF Polarity Normal & Invert Maximum Input 300V (DC+AC peak), CATII Waveform Signal Process + , - , FFT Offset Range 2mV/div ~ 20mV/div : 0.5V ; 50mV/div ~ 200mV/div : 5V ; 500mV/div ~ 2V/div : 50V ; 5V/div : 300V Bandwidth Limit 20MHz (-3dB) TRIGGER Sources CH1 , CH2 , Line , EXT Modes Auto-Level, AUTO, NORMAL, SINGLE, TV, Edge, Pulse Width Time-delay, Event-delay Coupling AC , DC , LF rej. , HF rej. , Noise rej. Sensitivity DC ~ 25MHz : Approx. 0.5div or 5mV 25MHz ~ 60MHz : Approx. 1div or 10mV EXT TRIGGER Range 15V Sensitivity DC ~ 30MHz : ~ 50mV ; 30M ~ 60MHz : ~100mV Input Impedance 1M£[¡Ó2% , ~ 16pF Maximum Input 300V (DC AC peak) , CATII HORIZONTAL Range 1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div Modes MAIN, WINDOW, WINDOW ZOOM, ROLL, SCAN, X-Y Accuracy ¡Ó0.01% Pre-Trigger 20 div maximum Post-Trigger 1000 div X-Y MODE X-Axis Input Channel 1 Y-Axis Input Channel 2 Phase Shift ¡Ó3¢X at 100kHz SIGNAL ACQUISITION Real-Time Sample Rate 1GSa/s maximum Equivalent Sample Rate 25GSa/s maximum Vertical Resolution 8 Bits Record Length 25K Dots maximum Acquisition Mode Normal, Peak Detect, Average Peak Detection 10ns Average 2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 CURSORS AND MEASUREMENT Voltage Measurement Vpp , Vamp , V avg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot , Fall Preshoot/Overshoot Time Measurement Freq , Period , Rise Time , Fall Time , Positive Width , NegativeWidth , Duty Cycle Delay Measurement Eight different delay measurement Cursors Measurement Voltage difference between cursors (£GV) Time difference between cursors (£GT) Auto Counter Resolution : 6 digits Accuracy : ¡Ó2% Signal Source: All available trigger source except the Video trigger mode CONTROL PANEL FUNCTION Autoset Adjust Vertical VOLT/DIV, Horizontal TIME/DIV, and Trigger level automatically Save Setup Up to 20 sets of measurement conditions Save Waveform 24 sets of waveform DISPLAY TFT LCD Type 5.6 inch Display Resolution 234 (Vertically) x 320 (Horizontally) Dots Display Graticule 8 x 10 divisions ; 8 x 12 divisions (menu off) Display Brightness Adjustable INTERFACE Go/NoGo Output 5V Maximum/10mA TTL Open Collector Output RS-232 Interface DB 9-pin male DTE RS-232 interface GPIB Interface (Option) Fully programmable with IEEE 488.2 compliance USB USB Host/Device 2.0 full speed supported POWER SOURCE Line Voltage Range AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection Battery Power(Option) Battery : 11.1V Li-Ion battery pack Charge Time : 8 hours (Power ON) Operating Time : 3 hours , depending on operating condition MISCELLANEOUS Multi-Language Menu Available Online Help Available Time Clock Time and Date, Provide the Date/Time for saved data DIMENSIONS &WEIGHT 254D x 142H x 310W(mm) Approx. 4.3kg

ʾ²¨Æ÷GDS-2062Ñ¡Åä¼þ   ÐͺŠÃû³Æ ˵Ã÷   GTP-060A Probe 10:1 DC~60MHz, 1:1 DC~6MHz / GDS-806 Series

		̨Íå¹ÌγINSTEK	Êý×Öʾ²¨Æ÷GDS-820	150MHzƵ¿íºÚ°×LCDÏÔʾÆ÷	11500	8990
		̨Íå¹ÌγINSTEK	Êýλ´¢´æʾ²¨Æ÷GDS-815S	Ƶ¿í:100MHz	0	0
		̨Íå¹ÌγINSTEK	Êýλ´¢´æʾ²¨Æ÷GDS-2204	200MHzƵ¿í£»4ÊäÈëͨµÀ	0	0
		̨Íå¹ÌγINSTEK	Êýλ´¢´æʾ²¨Æ÷GDS-2202	200MHzƵ¿í£»2ÊäÈëͨµÀ	0	0